Tips For Troubleshooting Your Home Alarm System In
System malfunctions and false alarms can be exasperating, and even worse, might prevent your home’s security from working the way it should. Fortunately, most issues, from false alarms to dead batteries, are easy to correct. Explore our tips for troubleshooting your home alarm system in . We’ll help keep your family safe and your system running the way it should.
Test Your Home Security System In
One great way to troubleshoot your home’s security is to test it! The latest systems let you put them in test mode to prevent you from prompting an emergency response. Once in test mode, follow these steps:
- Turn on your system as you typically would when you leave.
- Open a window or door protected by a contact sensor, or test other sensors. Shut the door or window once you’re finished so it doesn’t trigger the alarm as you leave test mode.
- Let the alarm resonate for 60 seconds to make sure a transmission is dispatched to the security company and an entry is created in the alarm activity log.
- Proceed to test devices as needed
- Inspect the alarm’s activity log to validate proper function.
No need to worry, monitoring agents will know that your system is being tested. Be sure to switch off test mode when complete. It’s a good idea to test every other month or whenever you adjust your home’s internet or phone connectivity.
Check The Positioning And Condition Of Motion Detectors
Although an crucial part of your alarm system, motion detectors are well known for false alarms. Do your part to prevent them with some basic troubleshooting.
- Perform a visual inspection. Are there items that could shift within the sensor’s detection zone, like a curtain blown in a breeze?
- Is the sensor dirty? Cobwebs, dirt, and grime can lead to malfunctions. Make sure the face is clean.
- Does the motion detector come with pet immunity you can enable? Some sensors can be configured to ignore pets weighing up to 100 pounds.
- When was the battery last replaced? A nearly depleted battery can affect performance or result in false alarms.
- Is the sensor aimed toward a source of heat? Too much heat from a fireplace, direct sun, or something else can cause an alarm.
Keep Batteries On Hand And Watch Out For Low Battery Signals
One of the great things about new home security systems is that they’ll notify you when batteries are running low. If your system is equipped with a control panel or smartphone app, you’ll often discover messages there. Depending on your alarm, you could detect an occasional beep when batteries are getting low.
Motion sensors, contact sensors, smoke detectors, and other wireless tools have batteries that will have to be replaced every year or two. It’s wise to keep batteries on hand and set a replacement schedule. Top systems also come with a backup battery for the primary control panel. This backup battery helps keep your system functioning if you have a power outage and should charge back up once the electricity is working again. If it doesn’t, you will need to replace it.
Troubleshooting Is Easy With ADT Home Security In
As the top name in home security, ADT builds systems that supply unsurpassed protection and functionality. Getting into test mode is simple through the ADT+ app or MyADT.com, and you’ll always get notifications when a sensor battery is running low. Contact Secure 24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your home. Dial (833) 205-9194 or fill out our form today!